How To Store Chainsaw Without Oil Leaking (6 ways will save more oil!)

A chainsaw oil leakage is a pain in the neck, especially when it burdens you with some extra cleanup. Remember, oil leaking does not always mean something wrong with your chainsaw.

Luckily, you have reached the right place. Because here, we will be guiding you on how to store chainsaw without oil leaking.

Oil leakage in a chainsaw can be about 10 ml per day. Anything more than that can make the blades go bad.

Some tips to prevent chainsaw oil leaks are cleaning, sharpening, and proper storage.

So today, we will dig into how to stop a chainsaw from leaking oil in the easiest ways possible. Let’s look at them below.

Why do chainsaws leak bar oil?

How To Store Chainsaw Without Oil Leaking

Chainsaws leak bar oil in order to keep the chain lubricated and to prevent the chain from rusting. In most cases, the usage of chainsaws with less lubricant can cause too much friction and a hot bar guide.

Again, the heat may increase and melt all the grease inside the bar guide’s. After the heat gets dissipated, the grease will turn into a solid texture.

High pressure in the tank, over-filling the bar, or improper storage can also cause chainsaws to leak bar oil. That problem can be solved if you just open the cap and release all unwanted pressure.

How to store a chainsaw so it doesn’t leak oil

How To Store Chainsaw Without Oil Leaking

Common causes of oil leakage in a chainsaw

How To Store Chainsaw Without Oil Leaking

Although we know adequately about storing a chainsaw, it is also important to stay alert so that this oil leakage doesn’t happen simply. For this reason, we should know why oil leakage commonly occurs in a chainsaw.:

  • Overfilling an oil tank in order to store it.
  • Running a chainsaw before cutting it.
  • Draining the necessary oil out, which is sprayed from the chain in times of rotating at a high speed.
  • When the chain produces sawdust and absorbs oil. It causes a drip of oil.
  • When oil seeps because of temperature variations.

Why do chainsaws leak bar oil when not in use?

Chainsaws leak bar oil as a preventive measure from rust and internal damage.

Oil tanks that are poorly ventilated or overfilled are also a cause of chainsaw leaking bar oil when not in use. As the pressure starts to build up, the oil gets out of the tanks, which we can say overflowed.

Sometimes, punctures are also seen in the oil lines which makes a chainsaw leak when remaining idle. A chainsaw that leaks oil is not only a mess but also degrades its performance.

How To Store Chainsaw Without Oil Leaking

Frequently Asked Questions

What is the proper way to store a chainsaw?

The proper way to store a chainsaw is in a dry place where the weather can’t affect it at all. Outdoor areas usually cause potential dampness and rust in a chainsaw. Also, keep it away from the sun’s exposure to avoid UV embrittlement. So, a well-ventilated area would be perfect to store it.

How do I stop my Stihl chainsaw from leaking oil?

In order to stop your Stihl chainsaw from leaking oil, the first thing you need to do is check your oil reservoir. Then secure all the plugs before storing oil. And yes, do not forget to check the inner body of your saw. Now, hang the vertical storage, rear handle, and brake stop. Remember not to store your chainsaw on the sides.

Can you hang a chainsaw for storage?

Chainsaws will start needing storage after they go through care and precautions. As a result, the tool will remain safe from damage and less likely to rust. Also, remember to keep it away from direct sunlight to avoid dampness. Since chainsaws come in a robust texture, you can simply store them in a vertical orientation.

Is it normal for a chainsaw to leak bar oil?

Chainsaws are prone to leakage when there is no proper ventilation in their oil tank. Again, the guide bar’s oil flow will also start to reduce because of this improper ventilation. However, it is normal for your chainsaw to leak bar oil if this type of case arises. Besides, spraying oil and rotating them at high speed is another common cause of oil leaks.

How Do I Prevent Oil Leaks From My Chainsaw During Storage?

To prevent oil leaks when storing your chainsaw, drain the oil from the oil tank and clean the oil pump, then refill the oil tank with fresh oil. Store the chainsaw in an upright position with the bar and chain pointing up.

Can I Store My Chainsaw Without Draining Oil?

It’s recommended to drain the oil from the chainsaw before storing it for an extended period. Leaving oil in the tank can cause leakage and damage to your chainsaw. It’s best to refill the oil tank when you’re ready to use it.

What Are The Storage Requirements For A Chainsaw?

When storing your chainsaw, ensure the fuel tank is empty, the oil tank is drained, and the chain is tensioned correctly. Store it in a dry, cool area and away from any heat source, including direct sunlight.

How Long Can I Store My Chainsaw Before Using It Again?

If you properly store your chainsaw, you can store it for up to six months before using it again. However, it’s best to check the manufacturer’s recommendation for the specific model of your chainsaw for optimal storage duration.

Can I Store My Chainsaw On Its Side Or Upside Down?

It’s not recommended to store your chainsaw on its side or upside down as it can cause oil leaks and damage to your chainsaw. Always store your chainsaw in an upright position with the bar and chain pointing up.


By implementing these simple practices, you can effortlessly store your chainsaw without worrying about oil leaks. Remember to always clean and dry your chainsaw thoroughly before storing it away. Use a fuel stabilizer in the fuel mixture to protect the carburetor from gumming up.

Ensure that the chainsaw is stored in a dry and cool place, protected from moisture. Furthermore, keep the chainsaw standing upright to prevent oil leakage. Finally, cover the chainsaw with a protective cover to prevent dust and other debris from accumulating on it.

Following these practices will ensure that your chainsaw stays in optimal condition, ready for use whenever you need it. With a little effort and attention to detail, you can store your chainsaw with confidence, knowing that it will be ready for you the next time you need to use it.

Rate this post

Johnathan Brewer

Hello, I’m Johnathan Brewer, a professional woodworker and power tools salesperson. I’ve worked with top interior designers and architects of the city. With an experience of 11 years in this field, I can suggest the best tips for bigger DIYers. I help my friends and neighbors with their tools. I specialize in restoring, repairing, designing, and decorating. There are even some great woodworking tactics that I’d love to share with you. With that information and suggestions, you can do really good professional work in a very short time.

Recent Posts